| ITEM | Aluminum Foil Tape |
| Tensile Strength | ≥2.5/kn/m≤ |
| Peel Adhesive | ≥30oz/in |
| Peel Adhesive(180#730) | ≥18N/2.5cm |
| Glue Amount(g/m2) | 50 |
| Thickness(Micron) | 50,65,70 |
| Normal Color | Sliver |
| Product Size | As clients’request |
The aluminum foil tape is made of high-quality pressure-sensitive adhesive with good viscosity, strong adhesion and anti-aging effects. The thermal insulation performance is greatly improved. It is the main raw and auxiliary materials for refrigerator and freezer manufacturers, and also the necessary raw materials for thermal insulation material distribution departments. It is widely used in refrigerator, air conditioner, automobile, petrochemical, bridge, hotel, electronics and other industries.
The purity is higher than 99.95%, and its function is to eliminate electromagnetic (EM) interference, isolate the harm of electromagnetic wave to human body, and avoid affecting the function due to unnecessary voltage and current. In addition, it has a good effect on the discharge of static electricity after grounding. The material is polyester fiber, which is not easy to crack and damage after repeated use or multiple bending. It has strong adhesive force and good electrical conductivity. It can be easily wound on wire materials and cut into various specifications according to customer requirements.
U.V resistance, Anti-flaming, Anti-moisture, Chemical isolation, Good for harsh long term outdoor application, Bright silver, Adapting to different weather, etc.
Before using the aluminum foil tape, clean all the substrates to be used, and remove the floating ash and stains. Generally, when used in electronic products, do not wipe with water or wet cloth, but clean with dry cloth or dry brush.
After cleaning, tear off the aluminum foil tape for operation. The aluminum foil tape uses high-quality pressure-sensitive adhesive, which is very sticky. Therefore, it is necessary to determine the position to be connected, otherwise it will be troublesome to tear it off again when it is stuck crooked.
After bonding, press the aluminum foil tape with your fingers for several times, so that the adhesive layer can fully play its role and the bonding is firm enough. If there is excess glue on the edge of the tape, use a blade to carefully remove it.